Corrosion Inhibiting Cleaners are specialized solutions designed to remove contaminants while preventing rust and corrosion on metal surfaces. They form a protective layer that shields metals from environmental factors like moisture and oxidation. These cleaners are commonly used in industrial, automotive, and marine applications for long-term corrosion control.

Size: Typically available in 1-gallon, 5-gallon, and 55-gallon containers.

Grade: Industrial-grade, MIL-PRF-16173E, or ASTM-compliant formulations.

Viscosity: Ranges from 50-500 cP (centipoise) depending on the formulation.

Buoyancy: Not applicable (non-buoyant liquid formulations).

Material: Water-based or solvent-based, containing amines, phosphates, or other corrosion inhibitors.

pH Level: Typically neutral to slightly alkaline (pH 7-10).

Flash Point: Varies by solvent content (e.g., >140°F for water-based, lower for solvent-based).

Operating Temperature: -20°F to 200°F (-29°C to 93°C) depending on formulation.

Application Method: Spray, wipe, dip, or immersion.

Drying Time: 5-30 minutes depending on environmental conditions.

Corrosion Protection: Provides up to 500+ hours salt spray resistance (ASTM B117).